Low S&P Levels
Sulphur and phosphorus (S&P) are harmful impurities in Steel. With high levels of phosphorus steel gets very brittle and there is the risk of cracking at very low temperatures. High levels of sulphur lower the melting point of steel greatly reducing its strength under high temperature conditions. Lower levels of S&P can be achieved only through advanced steel making technology. Such low S&P levels, as specified in the 500D specifications of BIS, are almost impossible to be achieved through normal scrap and induction furnace route. Beekay has state-of-the-art infrastructure and stringent quality control procedures in place to enable it to manufacture high grade TMT bars that comply with grade specifications.
CHEMICAL PROPERTIES
Properties | Unit | BEEKAY TURBO Fe500D | IS 1786 Fe500D | Primary Producers Fe500D | Fe500D TURBO Fe500 | IS 1786 Fe500 | Primary Producers Fe500 |
---|---|---|---|---|---|---|---|
Carbon | % | 0.25 max | 0.25 max | 0.25 max | 0.25 max | 0.30 max | 0.25 max |
Carbon Equivalent | % | 0.40 max | 0.42 max | 0.40 max | 0.42 max | 0.42 max | 0.42 max |
Sulphur | % | 0.035 max | 0.040 max | 0.035 max | 0.050 max | 0.055 max | 0.050 max |
Phosphorus | % | 0.035 max | 0.040 max | 0.035 max | 0.050 max | 0.055 max | 0.050 max |
Sulphur + Phosphorus | % | 0.070 max | 0.075 max | 0.070 max | 0.095 max | 0.105 max | 0.095 max |
MECHANICAL PROPERTIES
Properties | Unit | BEEKAY TURBO Fe500D (Typical) | IS 1786 Fe500D | Primary Producers Fe500D | Fe500D TURBO Fe500 (Typical) | IS 1786 Fe500 | Primary Producers Fe500 |
---|---|---|---|---|---|---|---|
Yield Stress | N/mm2 | 540 min | 500 min | 525 min | 500 min | 500 min | 500 min |
Uitimate | % | 0.40 max | 0.42 max | 0.40 max | 0.42 max | 0.42 max | 0.42 max |
Tensile Strength | N/mm2 | 600 min | 565 min | 600 min | 600 min | 545 min | 545 min |
UTS?YS | Ratio | 1.12 min | 1.10 min | 1.15 min | 1.15 min | 1.09 min | 1.09 min |
Elongation | % | 18 min | 16 min | 18 min | 18 min | 12 min | 12 min |